error source? on update of world

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

error source? on update of world

Harry Putnam

The messages below show up at the login prompt when I boot my updated
world system.  I've searched this group on all of those in caps at
gmane and got some  hits but not that I could put together into a plan
of action.

First, where do they come from... dmesg is inlined at the end.

configuration error - unknown item 'FAILLOG_ENAB' (notify administrator)
configuration error - unknown item 'LASTLOG_ENAB' (notify administrator)
configuration error - unknown item 'MOTD_FILE' (notify administrator)
configuration error - unknown item 'FTMP_FILE' (notify administrator)
configuration error - unknown item 'ENV_ROOTPATH' (notify administrator)
configuration error - unknown item 'PASS_MIN_LEN' (notify administrator)
configuration error - unknown item 'CHFN_AUTH ' (notify administrator)


Linux version 2.6.14-gentoo-r2 (root@reader) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP PREEMPT Wed Nov 16 14:46:31 CST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
 BIOS-e820: 000000001ffc0000 - 000000001fff8000 (ACPI data)
 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131008
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126912 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                   ) @ 0x000ff980
ACPI: RSDT (v001 D850MV MV85010A 0x20020328 MSFT 0x00001011) @ 0x1fff0000
ACPI: FADT (v001 D850MV MV85010A 0x20020328 MSFT 0x00001011) @ 0x1fff1000
ACPI: MADT (v001 D850MV MV85010A 0x20020328 MSFT 0x00001011) @ 0x1ffe3732
ACPI: DSDT (v001 D850MV MV85010A 0x00000004 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=1280x1024 ro root=100 init=/linuxrc ramdisk=8192 real_root=/dev/hda5 hdc=ide-scsi hdd-ide-scsi video=vesafb:mtrr,ywrap,1280x1024-24@70
ide_setup: hdc=ide-scsi
ide_setup: hdd-ide-scsi
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c049e000 soft=c0496000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1994.209 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 512716k/524032k available (2635k kernel code, 10828k reserved, 794k data, 216k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3993.41 BogoMIPS (lpj=7986829)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Total of 1 processors activated (3993.41 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
checking if image is initramfs...softlockup thread 0 started up.
 it is
Freeing initrd memory: 1687k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: ff800000-ff8fffff
  PREFETCH window: e6900000-f69fffff
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: ff900000-ff9fffff
  PREFETCH window: f6a00000-f6afffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
vesafb: unrecognized option mtrr
vesafb: ATI Technologies Inc., R100, 01.00 (OEM: ATI RADEON VE)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:51e0
vesafb: pmi: set display start = c00c5274, set palette = c00c52c0
vesafb: pmi: ports = c810 c816 c854 c838 c83c c85c c800 c804 c8b0 c8b2 c8b4
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2730
Console: switching to colour frame buffer device 160x64
vesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 10240k, total 65536k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: MAXTOR 6L060J3, ATA DISK drive
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
hdb: WDC WD600BB-00CAA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-ROM DVD-116, ATAPI CD/DVD-ROM drive
hdd: ATAPI CD-RW 32/12/40X, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 117266688 sectors (60040 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdb: max request size: 128KiB
hdb: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes not supported
 hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 >
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 393216 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 216k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 23 (level, low) -> IRQ 16
ehci_hcd 0000:02:01.2: EHCI Host Controller
ehci_hcd 0000:02:01.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:01.2: irq 16, io mem 0xff9ffc00
ehci_hcd 0000:02:01.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.2: irq 17, io base 0x0000ef80
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 17
ohci_hcd 0000:02:01.0: OHCI Host Controller
ohci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:02:01.0: irq 17, io mem 0xff9fd000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:02:01.1: OHCI Host Controller
ohci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:02:01.1: irq 18, io mem 0xff9fe000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1306 $ Ben Collins <[hidden email]>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 1.12 loaded.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [hidden email]
ReiserFS: hda5: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda5
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 537696k swap on /dev/hdb5.  Priority:-1 extents:1 across:537696k
EXT3 FS on hda5, internal journal
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 19
e100: eth0: e100_probe: addr 0xff9fc000, irq 19, MAC addr 00:03:47:FA:4B:13
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
XFS mounting filesystem hdb9
Ending clean XFS mount for filesystem: hdb9
Real Time Clock Driver v1.12
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex

--
[hidden email] mailing list

Reply | Threaded
Open this post in threaded view
|

Re: error source? on update of world

Iain Buchanan
On Wed, 2005-11-16 at 22:33 -0600, Harry Putnam wrote:
> The messages below show up at the login prompt when I boot my updated
> world system.

Did you update all the config files before you rebooted?

--
Iain Buchanan <[hidden email]>

--
[hidden email] mailing list

Reply | Threaded
Open this post in threaded view
|

Re: error source? on update of world

Harry Putnam
Iain Buchanan <[hidden email]> writes:

> On Wed, 2005-11-16 at 22:33 -0600, Harry Putnam wrote:
>> The messages below show up at the login prompt when I boot my updated
>> world system.
>
> Did you update all the config files before you rebooted?

Yes, and checked them again too, also ran  revdep-rebuild

Which should have found those kind of errors.

Nearly all the config changes were in files I haven't altered so I
diffed most of them and overwrote the older ones.

Do you see something that made you ask that particular question or
just shooting in the dark?

--
[hidden email] mailing list

Reply | Threaded
Open this post in threaded view
|

Re: Re: error source? on update of world

Iain Buchanan
On Thu, 2005-11-17 at 02:10 -0600, Harry Putnam wrote:
> Iain Buchanan <[hidden email]> writes:
>
> > On Wed, 2005-11-16 at 22:33 -0600, Harry Putnam wrote:
> >> The messages below show up at the login prompt when I boot my updated
> >> world system.
> >
> > Did you update all the config files before you rebooted?
>
> Yes, and checked them again too, also ran  revdep-rebuild
[snip]
> Do you see something that made you ask that particular question or
> just shooting in the dark?

It kind of rang bells of pam not being updated properly, not sure.  Not
an expert here...
--
Iain Buchanan <[hidden email]>

--
[hidden email] mailing list

Reply | Threaded
Open this post in threaded view
|

Re: error source? on update of world

Neil Bothwick
In reply to this post by Harry Putnam
On Wed, 16 Nov 2005 22:33:51 -0600, Harry Putnam wrote:

> The messages below show up at the login prompt when I boot my updated
> world system.  I've searched this group on all of those in caps at
> gmane and got some  hits but not that I could put together into a plan
> of action.
>
> First, where do they come from... dmesg is inlined at the end.
>
> configuration error - unknown item 'FAILLOG_ENAB' (notify administrator)
> configuration error - unknown item 'LASTLOG_ENAB' (notify administrator)
> configuration error - unknown item 'MOTD_FILE' (notify administrator)
> configuration error - unknown item 'FTMP_FILE' (notify administrator)
These are all settings from /etc/login.defs. Although I have this file on
my system, no package appears to own it, so I suspect it is part of pam
(I removed pam many months ago). Did you update pam or shadow?


--
Neil Bothwick

Seduced by the Chocolate side of the Force...

signature.asc (196 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: error source? on update of world

Iain Buchanan
On Thu, 2005-11-17 at 09:05 +0000, Neil Bothwick wrote:
> On Wed, 16 Nov 2005 22:33:51 -0600, Harry Putnam wrote:
>
> > The messages below show up at the login prompt when I boot my updated
> > world system.
> >
> > configuration error - unknown item 'FAILLOG_ENAB' (notify administrator)
>  
> These are all settings from /etc/login.defs. Although I have this file on
> my system, no package appears to own it, so I suspect it is part of pam

/etc/login.defs is owned by sys-apps/pam-login.  You can check the
version with `emerge -p pam-login`.  Try re-emerging it and see if you
missed updating /etc/login.defs by accident.

(I have pam-login-4.0.12, and I don't see those config items
in /etc/login.defs)

If that fails, post back and we'll see!
--
Iain Buchanan <[hidden email]>

--
[hidden email] mailing list

Reply | Threaded
Open this post in threaded view
|

Re: error source? on update of world

Harry Putnam
In reply to this post by Neil Bothwick
Neil Bothwick <[hidden email]> writes:

> These are all settings from /etc/login.defs. Although I have this file on
> my system, no package appears to own it, so I suspect it is part of pam
> (I removed pam many months ago). Did you update pam or shadow?

Yes, pam and I think Iain has guessed the problem.  Rebooting now

--
[hidden email] mailing list

Reply | Threaded
Open this post in threaded view
|

Re: error source? on update of world

Harry Putnam
In reply to this post by Iain Buchanan
Iain Buchanan <[hidden email]> writes:

>> These are all settings from /etc/login.defs. Although I have this file on
>> my system, no package appears to own it, so I suspect it is part of pam
>
> /etc/login.defs is owned by sys-apps/pam-login.  You can check the
> version with `emerge -p pam-login`.  Try re-emerging it and see if you
> missed updating /etc/login.defs by accident.

Yup looks like I went the wrong way somehow.  Instead of cping the new
conf over the original  I moved the new conf to
WAS.cfg0000_login.defs_ON_111405_140846 and never copied it over
/etc/login.defs.

> (I have pam-login-4.0.12, and I don't see those config items
> in /etc/login.defs)

Ditto here... we'll see shortly what a reboot brings

--
[hidden email] mailing list

Reply | Threaded
Open this post in threaded view
|

Re: error source? on update of world

Harry Putnam
Harry Putnam <[hidden email]> writes:

>> /etc/login.defs is owned by sys-apps/pam-login.  You can check the
>> version with `emerge -p pam-login`.  Try re-emerging it and see if you
>> missed updating /etc/login.defs by accident.
>
> Yup looks like I went the wrong way somehow.  Instead of cping the new
> conf over the original  I moved the new conf to
> WAS.cfg0000_login.defs_ON_111405_140846 and never copied it over
> /etc/login.defs.
>
>> (I have pam-login-4.0.12, and I don't see those config items
>> in /etc/login.defs)
>
> Ditto here... we'll see shortly what a reboot brings

On reboot.... no such messages.  Thanks

--
[hidden email] mailing list